Lab 2

Title: Separation of alloys and Solids Purpose: The purpose of this experiment was to enjoyment the process of separating pastiches of different solids. Procedure: This experiment consisted of different processes to rat a mixture of solids into the four individual solids: sand, benzoic bitter, work out fillings, and sodium chloride. To remove the iron fillings from the mixture I book a attractor and scanned it across the entire mixture and the draw forced pick ated up all the iron pieces. Then to pick out the sand from the rest of the mixture I het up up the mixture with piss in a beaker and when I poured the heated pellucid into a cup the sand remained in the female genitalia of the beaker. in conclusion to separate the benzoic acid and sodium chloride I utilize a filtration system and the sodium chloride and water drained into a cup while the benzoic acid remained on the filter. information: Item | cumulus (grams) | Weighing hit | 0.6 g | Di sh + Mixture | 7.9 g | Net Mass of Mixture | 7.

3 g | | Mass (Grams) | Percent of Mixture | Iron Fillings | 1.8g | 26.9% | Sand | 1.5g | 22.4% | flurry Salt | 1.9g | 28.4% | Benzoic window glass | 1.5g | 22.4% | Total: | 6.7g | | Observations: Some things I observed during this laboratory let in the magnet not picking up some of the little iron particles without getting in reality close to the solids mixture. withal both the sodium chloride had somewhat of a sour tint when heated. The water in the sodium chloride took protracted than I had anticipate to evaporate considering the lack of humidit y in the climate here.If you motivation to ! get a full essay, consecrate it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: write my paper